| Filename | Virtual Machine Adding Memory Cheatsheet |
| Permission | rw-r--r-- |
| Author | Unknown |
| Date and Time | 11/09/2015 |
| Label | Cheatsheet |
| Action |
Extreme Hacking | Sadik Shaikh
Ethical Hacking Institute Course in Pune-India
This tutorial will explain how to perform the following Linux KVM VM activities:
Add Memory to VM
Add vCPU to VM
Add Disk to VM
Save VM Configuration
Delete a VM
1. Add Memory to Virtual Machine
To add additional memory to your VM, you should do the following:
Shutdown your VM
Edit the VM file and increase the value of maximum memory allocated to this VM
Restart the VM
Use virsh setmem to set the memory upto the maximum memory allocated for this VM.
In this example, let us increase the memory of myRHELVM1’s VM from 2GB to 4GB.
First, shutdown the VM using virsh shutdown as shown below:
# virsh shutdown myRHELVM1
Domain myRHELVM1 is being shutdown
Next, edit the VM using virsh edit:
# virsh edit myRHELVM1
Look for the below line and change the value for memory to the following. In my example, earlier it was 2097152:
<memory unit='KiB'>4194304</memory>
Please note that the above value is in KB. After making the change, save and exit:
# virsh edit myRHELVM1
Domain myRHELVM1 XML configuration edited.
Restart the VM with the updated configuration file. Now you will see the max memory increased from 2G to 4G.
You can now dynamically modify the VM memory upto the 4G max limit.
Create the Domain XML file using virsh create
# virsh create /etc/libvirt/qemu/myRHELVM1.xml
Domain myRHELVM1 created from /etc/libvirt/qemu/myRHELVM1.xml
View the available Memory for this domain. As you see below, even though the maximum available memory is 4GB, this domain only has 2GB (Used memory).
# virsh dominfo myRHELVM1 | grep memory
Max memory: 4194304 KiB
Used memory: 2097152 KiB
Set the memory for this domain to 4GB using virsh setmem as shown below:
# virsh setmem myRHELVM1 4194304
Now, the following indicates that we’ve allocated 4GB (Used memory) to this domain.
# virsh dominfo myRHELVM1 | grep memory
Max memory: 4194304 KiB
Used memory: 4194304 KiB
2. Add VCPU to VM
To increase the virtual CPU that is allocated to the VM, do virsh edit, and change the vcpu parameter as explained below.
In this example, let us increase the memory of myRHELVM1’s VM from 2GB to 4GB.
First, shutdown the VM using virsh shutdown as shown below:
# virsh shutdown myRHELVM1
Domain myRHELVM1 is being shutdown
Next, edit the VM using virsh edit:
# virsh edit myRHELVM1
Look for the below line and change the value for vcpu to the following. In my example, earlier it was 2.
<vcpu placement='static'>4</vcpu>
Create the Domain XML file using virsh create
# virsh create /etc/libvirt/qemu/myRHELVM1.xml
Domain myRHELVM1 created from /etc/libvirt/qemu/myRHELVM1.xml
View the virtual CPUs allocated to this domain as shown below. This indicates that we’ve increased the vCPU from 2 to 4.
# virsh dominfo myRHELVM1 | grep -i cpu
CPU(s): 4
CPU time: 21.0s
3. Add Disk to VM
In this example, we have only two virtual disks (vda1 and vda2) on this VM.
# fdisk -l | grep vd
Disk /dev/vda: 10.7 GB, 10737418240 bytes
/dev/vda1 * 3 1018 512000 83 Linux
/dev/vda2 1018 20806 9972736 8e Linux LVM
There are two steps involved in creating and attaching a new storage device to Linux KVM guest VM:
First, create a virtual disk image
Attach the virtual disk image to the VM
Let us create one more virtual disk and attach it to our VM. For this, we first need to create a disk image file using qemu-img create command as shown below.
In the following example, we are creating a virtual disk image with 7GB of size. The disk images are typically located under /var/lib/libvirt/images/ directory.
# cd /var/lib/libvirt/images/
# qemu-img create -f raw myRHELVM1-disk2.img 7G
Formatting 'myRHELVM1-disk2.img', fmt=raw size=7516192768
To attach the newly created disk image, use the virsh attach-disk command as shown below:
# virsh attach-disk myRHELVM1 --source /var/lib/libvirt/images/myRHELVM1-disk2.img --target vdb --persistent
Disk attached successfully
The above virsh attach-disk command has the following parameters:
myRHELVM1 The name of the VM
–source The full path of the source disk image. This is the one that we created using qemu-image command above. i.e: myRHELVM1-disk2.img
–target This is the device mount point. In this example, we want to attach the given disk image as /dev/vdb. Please note that we don’t really need to specify /dev. It is enough if you just specify vdb.
–persistent indicates that the disk that attached to the VM will be persistent.
As you see below, the new /dev/vdb is now available on the VM.
# fdisk -l | grep vd
Disk /dev/vda: 10.7 GB, 10737418240 bytes
/dev/vda1 * 3 1018 512000 83 Linux
/dev/vda2 1018 20806 9972736 8e Linux LVM
Disk /dev/vdb: 7516 MB, 7516192768 bytes
Now, you can partition the /dev/vdb device, and create multiple partitions /dev/vdb1, /dev/vdb2, etc, and mount it to the VM. Use fdisk to create the partitions as we explained earlier.
Similarly to detach a disk from the guest VM, you can use the below command. But be careful to specify the correct vd* otherwise you may end-up removing wrong device.
# virsh detach-disk myRHELVM1 vdb
Disk detached successfully
4. Save Virtual Machine Configuration
If you make lot of changes to your VM, it is recommended that you save the configurations.
Use the virsh dumpxml file to take a backup and save the configuration information of your VM as shown below.
# virsh dumpxml myRHELVM1 > myrhelvm1.xml
# ls myrhelvm1.xml
myrhelvm1.xml
Once you have the configuration file in the XML format, you can always recreate your guest VM from this XML file, using virsh create command as shown below:
virsh create myrhelvm1.xml
5. Delete KVM Virtual Machine
If you’ve created multiple VMs for testing purpose, and like to delete them, you should do the following three steps:
Shutdown the VM
Destroy the VM (and undefine it)
Remove the Disk Image File
In this example, let us delete myRHELVM2 VM. First, shutdown this VM:
# virsh shutdown myRHELVM2
Domain myRHELVM2 is being shutdown
Next, destory this VM as shown below:
# virsh destroy myRHELVM2
Domain myRHELVM2 destroyed
Apart from destroying it, you should also undefine the VM as shown below:
# virsh undefine myRHELVM2
Domain myRHELVM2 has been undefined
Finally, remove any disk image file that you’ve created for this VM from the /var/lib/libvirt/images directory:
Now you can remove the disk img file under /var/lib/libvirt/images
rm /var/lib/libvirt/images/myRHELVM2-disk1.img
rm /var/lib/libvirt/images/myRHELVM2-disk2.img
www.extremehacking.org
CEHv9 CHFI ECSAv9 CAST ENSA CCNA CCNA SECURITY MCITP RHCE CHECKPOINT ASA FIREWALL VMWARE CLOUD ANDROID IPHONE NETWORKING HARDWARE TRAINING INSTITUTE IN PUNE, Certified Ethical Hacking, Center For Advanced Security Training in India, IT Security Training Information Security Traning Courses in Pune, ceh certification in pune, Ethical Hacking Course in Pune